FI MODE
DEALER MODE (FI MODE code )
BLACK W/ GREEN BAND Wire with a WHITE STRIPE and a
WHITE W/ GREEN BAND Wire with a RED STRIPE
黑底白細條
白底紅細條
短路後 就可以看 FI code了
C11 - Camshaft position sensor (CMPS)
C12 - Crankshaft position sensor (CKPS) Pick-up coil signal, signal generator
C13 - Intake air pressure sensor (IAPS)
C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C44 - HO2 sensor
C49 - PAIR control solenoid valve
C60 - Cooling fan control system ( Cooling fan relay)
TP SENSOR ADJUSTMENT
TPS ADJUSTMENT
1. Adjust the engine rpm to 1 300 r/min. (2-15)
2. Connect the special tool (Mode select switch) to the dealer
mode coupler at the wiring harness.
3. If the throttle position sensor adjustment is necessary, remove
the air cleaner box (5-13) and follow the procedure
below.
4. Loosen the screw and turn the throttle position sensor 1 and
bring the line to the middle.
5. Then, tighten the screw to fix the throttle position sensor.
留言